TekJeep

← Back to TekJeep AI · Jeep models · What tires fit? · Trail checklist · Will it fit?

Jeep stock specs

Pick a model and year to see the stock bolt pattern, typical tire sizes, axles, suspension, and engines. Every figure is copied from our model hubs and existing fit pages — we will not invent a spec.

Years are limited to the range listed on this model’s hub.

JL Wrangler

2018–present

The current Wrangler, in 2-door and Unlimited 4-door, including the 4xe plug-in hybrid. Solid Dana axles front and rear, with Dana 44s on Rubicon.

Bolt pattern
5×5" (5×127 mm)
Typical stock tires
245/75R17 (Sport) to 285/70R17 (~33") on Rubicon
Front axle
Solid Dana axles front and rear, with Dana 44s on Rubicon.
Rear axle
Solid Dana axles front and rear, with Dana 44s on Rubicon.
Suspension
Varies by trim and year.
Engines
The hub mentions the 4xe plug-in hybrid and links a 3.6 oil-change guide. It does not list a full engine lineup.

Top fit answers

Affiliate search links · tag tekjeep-20. These follow the model you picked and are not a specific kit.

Disclaimer: These are typical figures copied from our model hubs. Trims and years vary. Check your door-jamb sticker and owner’s manual, and identify the axle before you order gears or shafts. This page will not invent a bolt pattern, tire size, axle, or engine that the hubs do not already state.

Stock specs for all 10 models

A crawlable table of the same hub figures. On a small screen, swipe sideways to see every column.

Model Years Bolt pattern Stock tires Front axle Rear axle Suspension Engines Hub
JL Wrangler2018–present5×5" (5×127 mm)245/75R17 (Sport) to 285/70R17 (~33") on RubiconSolid Dana axles front and rear, with Dana 44s on Rubicon.Solid Dana axles front and rear, with Dana 44s on Rubicon.Varies by trim and year.The hub mentions the 4xe plug-in hybrid and links a 3.6 oil-change guide. It does not list a full engine lineup.JL hub
JK Wrangler2007–20185×5" (5×127 mm)~31–32" (255/75R17 on Rubicon)Varies by trim and year. Check the tag on the axle and your owner’s manual.Varies by trim and year. Check the tag on the axle and your owner’s manual.Varies by trim and year.2007–2011 trucks have the 3.8L V6, and 2012–2018 trucks have the 3.6L Pentastar.JK hub
JT Gladiator2020–present5×5" (5×127 mm)245/75R17 to 285/70R17 (~33") on Rubicon/MojaveVaries by trim and year. Check the tag on the axle and your owner’s manual.Varies by trim and year. Check the tag on the axle and your owner’s manual.Mojave and Rubicon trims come with more capable suspension from the factory.Varies by trim and year. Check your door-jamb sticker and owner’s manual.JT hub
TJ Wrangler1997–20065×4.5" (5×114.3 mm)~29–30" (Rubicon 245/75R16 ~31")Varies by trim and year. Check the tag on the axle and your owner’s manual.Varies by trim and year. Check the tag on the axle and your owner’s manual.Coil-spring Wrangler, plus the long-wheelbase Unlimited (LJ) from 2004–2006.Most have the 4.0L inline-six.TJ hub
YJ Wrangler1987–19955×4.5" (5×114.3 mm)~28–29" (215/75R15 / P225/75R15)Dana 30 front axle.Varies by trim and year. Check the tag on the axle and your owner’s manual.Leaf springs at all four corners.The 4.0L inline-six arrived in 1991. The hub does not name the earlier engine.YJ hub
XJ Cherokee1984–20015×4.5" (5×114.3 mm)~27–29" (225/75R15)Varies by trim and year. Check the tag on the axle and your owner’s manual.Varies by trim and year. Check the tag on the axle and your owner’s manual.Unibody SUV with coils up front and leaf springs out back.Many owners swear by the 4.0L inline-six. The hub does not list a full engine lineup.XJ hub
MJ Comanche1986–19925×4.5" (5×114.3 mm)~27–28" (often P205/75R15; options from ~P195/75R15 to P225/75R15)Factory 4WD models use a Dana 30 front axle. Identify your axle before ordering parts.The rear is most often a Dana 35, with a Dana 44 on some long-bed Metric Ton packages. Identify your axle before ordering parts.Unibody cab with a boxed bed frame, Quadra-Link coil springs up front and longer leaf springs in the rear.Engines commonly include the 2.5L four and the 4.0L inline-six (plus a 2.8L V6 in early years).MJ hub
ZJ Grand Cherokee1993–19985×4.5" (5×114.3 mm)~28–29" (P215/75R15 / P225/70R16)Factory 4WD models use a Dana 30 front axle. Identify your axle before ordering parts.Rear axles include the Dana 35 and aluminum-center Dana 44A, depending on year and equipment. Identify your axle before ordering parts.Unibody with coil springs at all four corners (Quadra-Coil).The 4.0L inline-six and 5.2L Magnum V8 are the common powertrains.ZJ hub
WJ Grand Cherokee1999–20045×5" (5×127 mm)~29–30" (P225/75R16, P245/70R16, P235/65R17)Factory 4WD models use a Dana 30 front axle. Identify your axle before ordering parts.The rear is typically a Dana 35 on many 4.0L models or an aluminum-center Dana 44A on many 4.7L V8 models—identify your axle before ordering parts.Unibody with solid axles and coil springs at all four corners.The 4.0L inline-six and 4.7L PowerTech V8 are the common U.S. powertrains.WJ hub
WK Grand Cherokee2005–20105×5" (5×127 mm)~29–31" (often P235/65R17 or P245/65R17; some trims P245/60R18). SRT8 uses low-profile 20-inch tires.Independent front suspension — the first Grand Cherokee to drop the solid front axle. Identify your axle and transfer case before ordering parts.Many WKs use a Chrysler 8.25-class solid rear axle (often called a 213 mm unit); some SRT8 equipment is described with a heavier Dana 44 / 226 mm rear. Identify yours before ordering gears.Unibody with an independent front suspension and a solid rear axle.U.S. engines commonly include the 3.7L V6, 4.7L V8 and 5.7L HEMI V8; the 6.1L HEMI powered the SRT8, and a 3.0L CRD diesel was offered in some markets (briefly in North America).WK hub

Hubs and top fit answers

Frequently asked questions

What does the Jeep stock specs lookup show?

Pick a model and a year in that model’s real range to see the stock bolt pattern, typical stock tire sizes, front and rear axle notes, suspension type, and engines, plus a link to the model hub and its top fit answers. Figures are copied from TekJeep’s existing model hubs and fit pages.

Where do the specs come from?

Only from the 10 /models/ hubs and the fit answers already linked from those hubs. If a hub is cautious — for example the WK rear axle — this page keeps that same wording. It does not invent a bolt pattern, axle, tire size, or engine.

Why can some fields say they are not named on the hub?

Some hubs describe bolt pattern and stock tires clearly but do not name a specific axle, engine lineup, or suspension type. In those cases the tool says so and points you to the hub, your door-jamb sticker, and the owner’s manual rather than filling the gap.

Does the year change the specs?

Most figures on the hubs are typical for the whole generation. The year list is limited to years that model was actually made. Where a hub already splits a fact by year — such as JK engines (3.8L V6 for 2007–2011, 3.6L Pentastar for 2012–2018) or the YJ 4.0L arriving in 1991 — the lookup highlights that for the year you picked.

What if my door-jamb sticker disagrees?

Trust the sticker and the owner’s manual. Trims and years vary. These are typical figures for shoppers and research, not a replacement for the data plate on your Jeep.