TekJeep

← Home · Jeep models

Jeep WJ Grand Cherokee

1999–2004 · model hub

Look up what tires fit → · Stock specs →

2004 Jeep Grand Cherokee WJ Columbia Edition, front three-quarter view
Photo: CZmarlin (Christopher Ziemnowicz) · CC BY-SA 4.0 via Wikimedia Commons

The second-generation Grand Cherokee and successor to the ZJ. Unibody with solid axles and coil springs at all four corners. Factory 4WD models use a Dana 30 front axle. The rear is typically a Dana 35 on many 4.0L models or an aluminum-center Dana 44A on many 4.7L V8 models—identify your axle before ordering parts. The 4.0L inline-six and 4.7L PowerTech V8 are the common U.S. powertrains, and it’s a capable trail SUV when you add lift and tires carefully.

Bolt pattern
5×5" (5×127 mm)
Typical stock tires
~29–30" (P225/75R16, P245/70R16, P235/65R17)
Common upgrade
31" with a 2–3" lift; 33" with ~3–4"+; 35s usually need ~4.5–6" plus trimming
Lift notes
Spacer, coil-spring or long-arm kits are common. Watch bump stops, control-arm angles, CV front driveshafts on some transfer cases, and unibody stiffening on taller lifts. Regear when you jump to 33s and up.

These are typical figures. Check your door-jamb sticker and owner’s manual, because trims and years vary. Factory wheels often use ~6.0–6.25" backspacing—bigger tires usually need different wheels, not just height.

Popular answers & guides

Have a different setup?

Ask TekJeep AI about your exact WJ Grand Cherokee, lift and tire size. It’s free.

Ask TekJeep AI All fit answers

Built one? Show us your build.